[Punch]
menu 1 { "TopNotch Punch Main Menu:", "Set &Up", "&Toolpaths", "&File", "&Modify Path", "&Opt/Tabs", "&Verify", "&Sheet", "&Library", "M&achine", "&EPost" }
menu 2 { "TopNotch Punch Main Menu:", "Set &Up", "&Toolpaths", "&File", "", "", "", "&Sheet", "&Library", "M&achine", "&EPost" }
menu 3 { "Toolpath:", "&Point", "&Linear", "&Arc", "&Grid", "&Contour", "Aut&o Program", "&Dynamic", "&Special Ops", "&Fit Path", "Repaint Pa&th" }
menu 4 { "Toolpath: Auto Program:", "&Change", "&Ok", "&Run", "&Skip", "&Kill", "", "", "", "", "" }
menu 5 { "Toolpath: Verify Path:", "&Select", "&Next", "&Previous", "&Change", "&Manager", "", "", "&Simulate Path", "S&haded Path", "Repaint Pa&th" }
menu 6 { "Toolpath: Modify Path:", "&Reverse", "&Delete", "R&eorder", "&Copy", "&Move", "&Array", "R&otate", "", "", "Repaint Pa&th" }
menu 7 { "Toolpath: Options:", "&Optimize", "&Sort", "&Display", "T&ab", "Tab &Ends", "&Break Up", "Start/Di&r", "", "", "Repaint Pa&th" }
menu 8 { "Toolpath: Modify Path: Select:", "&Single", "&Path", "T&ool", "", "&All", "", "", "", "", "Repaint Pa&th" }
menu 9 { "Toolpath: Point: Data Source:", "&Geometry", "Tool&path", "&Tools", "&Sheet", "&Clamps", "", "", "", "", "" }
menu 10 { "Toolpath: Point:", "&Centre", "&Endpoint", "&Midpoint", "", "", "", "", "", "", "" }
menu 11 { "Toolpath: Linear:", "&Start", "&Middle", "&End", "S&kip", "", "", "", "", "", "" }
menu 12 { "Set Up:", "&Set part", "&Move sheet", "&Bends", "&Load Tools", "&Clamps", "", "", "", "", "Repaint Pa&th" }
menu 13 { "Toolpath: Special Operations:", "A&uto Repo", "Add &Repo", "Add &Offset", "Add &Flip", "Add &Macro", "&Next Op", "&Set Ops", "&Delete Op", "", "" }
menu 14 { "Toolpath: Modify Path: Translate:", "&Rectang", "&Polar", "&Btween pts", "", "", "", "", "", "", "" }
menu 15 { "Toolpath: Modify Path: Rotate About:", "&Origin", "&Point", "", "", "", "", "", "", "", "" }
menu 16 { "Toolpath: Verify: Simulate:", "&Step", "&Run", "", "&Delay", "", "", "", "", "", "" }
menu 17 { "Toolpath: Dynamic:", "Save &Hit", "&Undo", "&Rotate", "&Priority", "&Tabs", "", "", "", "R&epaint", "&Done" }
menu 18 { "File:", "Ne&w", "&Edit", "&Get", "&Merge", "&Save", "", "", "", "", "&Help" }
menu 19 { "Toolpath: Auto Program:", "from &Library", "from &Machine", "", "", "", "", "", "", "", "" }

1. "TopNotch Punch Main Menu"
2. "Create Path Menu"
3. "Auto Program From Menu"
4. "Auto Program Menu"
5. "Analyze Path Menu"
6. "Modify Path Menu"
7. "Modify Path Menu"
8. "Edit Select Menu"
9. "Linear Select Menu"
10. "Sheet Menu"
11. "Turret Menu"
12. "Tool Library Menu"
13. "Edit Tool Menu"
14. "Special Operations Menu"
15. "File Menu"
16. "Set Up Path Menu"
17. "Define A Contour To Punch"
18. "Pick LINE On Side To Punch (Esc/Backup When Done)"
19. "Pick ARC On Side To Punch (Esc/Backup When Done)"
20. "Define Multiple Contours To Auto Program"
21. "Select Points For Punching (Esc/Backup When Done)"
22. "Select First Grid Corner"
23. "Select Second Corner (Esc/Backup When Done)"
24. "Select Optimize Start Point"
25. "Contour:"
26. "using tool:"
29. "Enter tab size"
30. "Enter priority"
31. "Enter the tool angle"
32. "Enter # of columns"
33. "Enter spacing between columns"
34. "Enter # of rows"
35. "Enter spacing between rows"
36. "Select Point"
37. "Select Data Source"
38. "Select a hit"
39. "Select the first hit in the path"
40. "Select the last hit in the path"
41. "Repainting "
42. "Dynamic programming"
43. "Modify Path: Move"
44. "Modify Path: Rotate"
45. "File List"
51. "Enter the rotation angle (CCW) in degrees"
52. "Enter the point to rotate about"
53. "Enter the rotation angle (CCW) in degrees"
54. "Enter the translation vector: "
55. "Enter the translation distance"
56. "Enter the translation angle"
57. "Enter the point to translate from"
58. "Enter the point to translate to"

60. "Enter the amount of the Reposition"

70. "Enter Clamp 1 position"
71. "Enter Clamp 2 position"
72. "Enter Clamp 3 position"
73. "Enter Clamp 4 position"
74. "Enter Clamp 5 position"
75. "Enter Clamp 6 position"

80. "Enter delay in seconds"
